| Trap OID | Trap Name | MF Log ID | Severity | Description | User Action |
| mcpTraps.1004 |
MCP_CM_SESSMGR_DESTURINOTSUPP |
30004 |
Major |
The destination URI is not supported. |
Verify all destinations in the application or the appmodule. |
| mcpTraps.1008 |
MCP_CM_SESSMGR_APPMODULENOTFOUND |
30027 |
Minor |
The desired Application module (<app module name>) was not found |
|
| mcpTraps.1009 |
MCP_CM_SESSMGR_FAILUPDTEOPENCALLIDFILE |
30008 |
Critical |
The platform was unable to create the 0x<orig>.id file or open the file for editing. |
Verify that MCP is running with administrator user rights and that the installation directory path does not exceed any OS limitations. |
| mcpTraps.1011 |
MCP_CM_SESSMGR_IDGENDIRUNACCBLE |
30010 |
Critical |
The ID generator directory was not accessible. |
Verify that MCP is running with administrator user rights and that the installation directory path does not exceed any OS limitations. |
| mcpTraps.1012 |
MCP_CM_SESSMGR_INITCALLSESSWNOLNMGR |
30012 |
Major |
Initializing CallSession with a NULL line manager. |
This is an unexpected condition. Restart the service if required. |
| mcpTraps.1013 |
MCP_CM_SESSMGR_ISDNCAUSECODEERR |
30013 |
Major |
The ISDN cause code (<isdn cause>) is out of range. |
This is an unexpected condition. Restart the service if required. |
| mcpTraps.1015 |
MCP_CM_SESSMGR_NOTPUTSEQNUMTOCALLIDFILE |
30016 |
Critical |
The 0x<orig>.id file was opened successfully to write to, but the MCP was unable to write an initial sequence number to the file, or the MCP cannot overwrite the existing sequence number. |
Verify that there is available disk space. Verify that the file has write permissions. |
| mcpTraps.1016 |
MCP_CM_SESSMGR_OUTCALLNORESOURCE |
30017 |
Major |
An outbound call was rejected due to no resource. |
Determine whether there are any unexpected active calls. If there are, check whether the outbound dialing destinations are reachable and functioning. Check the status of RM and SIP Server. Check the SIP client/gateway. Verify that inbound calls still function. |
| mcpTraps.1019 |
MCP_CM_SESSMGR_STRMMODUNEXPTEVENT |
30020 |
Major |
An attempt to open a media stream for ASR has failed, and the streaming module returned an unexpected event <event> on the StreamID <stream ID>. |
Check recorded utterance if RRU is used. If used, verify the RRU settings. |
| mcpTraps.1021 |
MCP_CM_SESSMGR_SYSIPNOTRETRVABLE |
30022 |
Critical |
The system IP address was not retrievable. |
This is an unexpected condition. Restart the service if required. |
| mcpTraps.1025 |
MCP_CM_SESSMGR_VRMINITFAIL |
30026 |
Critical |
The VRM initialization failed (<return value>). |
Check for any MCP_SRM traps preceding this trap. |
| mcpTraps.1028 |
MCP_CM_CMUTIL_CONFLICTEXT |
31002 |
Major |
A URI had both 'x' and 'postd=' (conflicting extensions). |
Check outbound dialing destination, for example, from <transfer>, remdial, and so on. |
| mcpTraps.1031 |
MCP_CM_CMUTIL_POSTDIALINVCHAR |
31005 |
Major |
The post dial number contained invalid characters. |
Verify all post dial destinations in the VoiceXML application or the appmodule. |
| mcpTraps.1032 |
MCP_CM_CMUTIL_POSTDIALLONG |
31006 |
Major |
The post dial number was more than 196 characters. |
Verify all post dial destinations in the VoiceXML application or the appmodule. |
| mcpTraps.1033 |
MCP_CM_CMUTIL_TELNUMINVCHAR |
31007 |
Major |
The telephone number contained invalid characters. |
Verify all telephone destinations in the VoiceXML application or the appmodule. |
| mcpTraps.1034 |
MCP_CM_CMUTIL_TELNUMLONG |
31008 |
Major |
The telephone number was more than 60 characters. |
Verify all telephone destinations in the VoiceXML application or the appmodule. |
| mcpTraps.1038 |
MCP_CM_LMBASE_FAILUPDTEOPENCALLIDFILE |
32001 |
Critical |
The 0x<orig>.id file could not be opened for updating. |
Verify that MCP is running with administrator user rights, and that the installation directory path does not exceed any OS limitations. |
| mcpTraps.1039 |
MCP_CM_LMBASE_IDGENDIRUNACCBLE |
32002 |
Critical |
The ID generator directory was not accessible. |
Verify that MCP is running with administrator user rights, and that the installation directory path does not exceed any OS limitations. |
| mcpTraps.1045 |
MCP_CM_LMBASE_NOTPUTSEQNUMTOCALLIDFILE |
32008 |
Critical |
Could not update the sequence number to the 0x<orig>.id file. |
Verify that there is available disk space. Verify that the file has write permissions. |
| mcpTraps.1049 |
MCP_CM_LMBASE_SYSIPNOTRETRVABLE |
32012 |
Critical |
The system IP address was not retrievable. |
This is an unexpected condition. Restart the service if required. |
| mcpTraps.1053 |
MCP_CM_LMSIP2_CUSTOMPARAMERROR |
33003 |
Major |
Unable to set custom parameter value for the header <name>. |
Check the VoiceXML application. |
| mcpTraps.1056 |
MCP_CM_LMSIP2_ERRPARSESDPCONTENT |
33006 |
Major |
Failed to parse SDP content due to <reason>. |
Check the SIP client/gateway. Check the SIP call flow and the SDP content. |
| mcpTraps.1058 |
MCP_CM_LMSIP2_MEDIAERROR |
33008 |
Major |
A media error detected; terminating the call. |
Check the transcoder library settings. Check the RTP timeout. |
| mcpTraps.1059 |
MCP_CM_LMSIP2_NONMATCHINGSIPINFO |
33010 |
Major |
The received SIP INFO message did not match any existing calls. |
Using Wireshark, check the SIP messages. |
| mcpTraps.1060 |
MCP_CM_LMSIP2_RECVUNEXPCTACK |
33012 |
Major |
The MCP received an unexpected ACK. |
Using Wireshark/tcpdump, analyze the SIP call flow. |
| mcpTraps.1061 |
MCP_CM_LMSIP2_REGISTERALGONOTSUPPORTED |
33013 |
Major |
The SIP authentication algorithm was not supported by the media platform. |
Check the operational state of the registrar. Check the SIP.registration configuration. Using Wireshark/tcpdump, analyze the SIP message flow. |
| mcpTraps.1062 |
MCP_CM_LMSIP2_REGISTERAUTHENTICATIONERROR |
33014 |
Major |
This was an authentication error for SIP registration. |
Check the operational state of the registrar. Check the SIP.registration configuration. Using Wireshark/tcpdump, analyze the SIP message flow. |
| mcpTraps.1063 |
MCP_CM_LMSIP2_REGISTERBADREQUEST |
33015 |
Major |
The REGISTER request was considered a bad request (invalid) and was rejected by the registrar. |
Check the operational state of the registrar. Check the SIP.registration configuration. Using Wireshark/tcpdump, analyze the SIP message flow. |
| mcpTraps.1064 |
MCP_CM_LMSIP2_REGISTERFORBIDDEN |
33016 |
Major |
GVP was not authorized to change the address of record. |
Check the operational state of the registrar. Check the SIP.registration configuration. Using Wireshark/tcpdump, analyze the SIP message flow. |
| mcpTraps.1065 |
MCP_CM_LMSIP2_REGISTERNOTACCEPTABLE |
33017 |
Major |
The address of record was not acceptable by the registrar. |
Check the operational state of the registrar. Check the SIP.registration configuration. Using Wireshark/tcpdump, analyze the SIP message flow. |
| mcpTraps.1066 |
MCP_CM_LMSIP2_REGISTERNOTFOUND |
33018 |
Major |
The address of record was not found by the registrar. |
Check the operational state of the registrar. Check the SIP.registration configuration. Using Wireshark/tcpdump, analyze the SIP message flow. |
| mcpTraps.1067 |
MCP_CM_LMSIP2_REGISTEROTHERERROR |
33019 |
Major |
This was a general error for SIP registration. |
Check the operational state of the registrar. Check the SIP.registration configuration. Using Wireshark/tcpdump, analyze the SIP message flow. |
| mcpTraps.1068 |
MCP_CM_LMSIP2_REGISTERTIMEOUT |
33020 |
Major |
The REGISTER request timed out, possibly due to the registrar not being active or due to a misconfiguration. |
Check the operational state of the registrar. Check the SIP registration configuration. Using Wireshark/tcpdump, analyze the SIP message flow. Check for firewall and network connections. |
| mcpTraps.1069 |
MCP_CM_LMSIP2_REGISTERDEFADJEXPIRY |
33022 |
Minor |
Registered, but the value configured for the sip.registerexpiryadjustment parameter was greater than the expires time. The default value used. |
Check the value of the configuration variable sip.registerexpiryadjustment. Verify that it is less the SIP Registration expiry time provided by the registrar. If it is not, reduce it to a value less than the SIP Registration expiry time. |
| mcpTraps.1070 |
MCP_CM_LMSIP2_SIPSTACKWARNING |
33023 |
Minor |
SIP Stack warning. Check the WARN message in the MCP log file for details of the problem. |
SIP Stack warning. Refer to the MCP log file for details of the problem. |
| mcpTraps.1072 |
MCP_CM_APPMODULE_FAILREGAPP |
34002 |
Major |
(<result>) Failed to register application. |
Check for duplicates in sessmgr.modules. Decrease the number of enabled modules. |
| mcpTraps.1073 |
MCP_CM_APPMODULE_FAILREGAPPMOD |
34003 |
Major |
(<result>) Failed to register application module <app module name> of type <app module type name>. |
Check for duplicates in sessmgr.modules. Decrease the number of enabled modules. |
| mcpTraps.1074 |
MCP_CM_APPMODULE_FAILSTRTWORKNGTHRD |
34004 |
Critical |
Failed to start working thread (<thread name>). |
This is an unexpected condition. Restart the service if required. |
| mcpTraps.1077 |
MCP_CM_REMDIAL_CANTCREATESERVERSOCK |
36000 |
Major |
The MCP could not create the server socket at port <port>, or the MCP could not create the server socket at a negative port <port>. |
Verify that the port configured at remdial.port is valid and available. |
| mcpTraps.1078 |
MCP_CM_REMDIAL_FAILREGREMDLMOD |
36001 |
Major |
(<result>) Failed to register remdial module <module name> of type <module type name>. |
Check for duplicates in sessmgr.modules. Decrease the number of enabled modules. |
| mcpTraps.1079 |
MCP_CM_NETANN_INVALIDPARAM |
35000 |
Minor |
The Netann inbound call was rejected due to an invalid parameter. |
Verify that SIP Request URI parameters are correct. |
| mcpTraps.1080 |
MCP_CM_NETANN_JOINCONFERENCEFAILED |
35001 |
Minor |
The Join conference failed. |
Check whether the number of conference participants has reached the maximum that is allowed. |
| mcpTraps.1081 |
MCP_CM_NETANN_ERRORPLAYINGMEDIA |
35002 |
Major |
Error playing the requested media: <media URL>. |
Verify that the media can be accessed by the MCP. For RTSP media, this is the only notification provided for inaccessible media. |
| mcpTraps.1083 |
MCP_CM_REMDIAL_SOCKETERROR |
36006 |
Major |
The user attempted a connection to the Remdial port, and there was an error at the socket level. |
Check the operational state of the server including the network connection. |
| mcpTraps.1084 |
MCP_CM_MTMPC_INITFAILED |
38000 |
Critical |
Failed to initialize MTMPC. |
Check for any previous traps. Check the operational state of the server. Check and correct the MCP configuration under the [mpc] section. |
| mcpTraps.1095 |
MCP_MPC_MEDIAMGR_BADAVICHNKSIZE |
48000 |
Major |
A bad AVI chunk size was found: <details>. |
Check the application and the media content(s). |
| mcpTraps.1096 |
MCP_MPC_MEDIAMGR_BADISOBOXSIZE |
48001 |
Major |
A bad size in the ISO box was found: <details>. |
Check the application. Make sure that the ISO file is encoded correctly. |
| mcpTraps.1099 |
MCP_MPC_MEDIAMGR_BADMAJ3GPPBRAND |
48004 |
Major |
A bad 3GPP major brand was found: <details>. |
Check the application. Re-encode the 3GP file. |
| mcpTraps.1100 |
MCP_MPC_MEDIAMGR_BRANDINCOMPT3GPP |
48005 |
Major |
Brand incompatible with 3GPP: <details>. |
Check the application. Re-encode the 3GP file. |
| mcpTraps.1103 |
MCP_MPC_MEDIAMGR_FAILTOSTARTRECORD |
48008 |
Major |
Unable to start recording <url> <details>. |
Check the application. Verify that there is available disk space. |
| mcpTraps.1104 |
MCP_MPC_MEDIAMGR_INVALIDMEDIA |
48009 |
Major |
Error in ParseMedia: <reason>, or invalid media: a malformed media frame of type <name> has been found. |
Check the application and the media content(s). |
| mcpTraps.1105 |
MCP_MPC_MEDIAMGR_MALFORMEDAVIHDR |
48010 |
Major |
A malformed AVI header was found: <details>. |
Check the application and the media content(s). |
| mcpTraps.1107 |
MCP_MPC_MEDIAMGR_NOISOTRAK |
48012 |
Major |
No ISO media track was recognized: <details>. |
Check the application. Make sure that the ISO file is encoded correctly. |
| mcpTraps.1108 |
MCP_MPC_MEDIAMGR_RECBUFFISOTOOSMALL |
48013 |
Major |
The recording buffer for ISO too small: <details>. |
In MCP configuration, increase the value of the parameter [mpc] mediamgr.isofilerecordheadersize. |
| mcpTraps.1110 |
MCP_MPC_MEDIAMGR_RTSPREPLYERROR |
48015 |
Major |
An RTSP reply error occurred: <details>. |
Check the RTSP server log and configuration. |
| mcpTraps.1111 |
MCP_MPC_MEDIAMGR_RTSPREQFAIL |
48016 |
Major |
An RTSP request error occurred: <details>. |
Check the RTSP server log and configuration. |
| mcpTraps.1112 |
MCP_MPC_MEDIAMGR_RTSPRTPERROR |
48017 |
Major |
An RTSP RTP interface error occurred: <details>. |
Check the RTSP server log and configuration. Check TCP port status on the MCP server. |
| mcpTraps.1113 |
MCP_MPC_MEDIAMGR_UNABLETOALLOCMEM |
48018 |
Major |
Unable to allocate new memory: <details>. |
This is an unexpected condition. Restart the service if required. |
| mcpTraps.1114 |
MCP_MPC_MEDIAMGR_UNEXPECTEDRTSPDISC |
48019 |
Major |
An unexpected RTSP disconnect occurred: <details>. |
Check the RTSP server log and configuration. |
| mcpTraps.1116 |
MCP_MPC_MEDIAMGR_UNSUPPORTEDAUDCHNLS |
48021 |
Major |
The number of audio channels was not supported: <details>. |
Check the application and media content(s) Note: MCP only supports single audio channel. |
| mcpTraps.1117 |
MCP_MPC_RTPIF_TXRTCPAPPPKTFAIL |
49006 |
Major |
MPCRTPStream: RTCP App Packet cannot be sent: <details>. |
Check system load and the connectivity with the other rtp endpoint. |
| mcpTraps.1118 |
MCP_MPC_MEDIAMGR_UNSUPPORTEDVIDFMT |
48023 |
Major |
The video format was not supported: <details>. |
Check the application and video content. |
| mcpTraps.1119 |
MCP_MPC_RTPIF_TXRTCPAPPPKTDELAY |
49007 |
Major |
MPCRTPStream: RTCP App Packet transmission is delayed: <details>. |
Check system load and the connectivity with the other rtp endpoint. |
| mcpTraps.1120 |
MCP_CM_MTMPC_CONNERROR |
38001 |
Major |
A connection error occurred: <error name>. |
Check the network for congestion. Check the status of the servers. |
| mcpTraps.1121 |
MCP_CM_SMMAIN_CALLMGRCFGPARAMERR |
20165 |
Critical |
The configuration parameter <config parameter name> was not set properly. |
Check the value for the specified configuration parameter. |
| mcpTraps.1124 |
MCP_CM_SMMAIN_CANTSTARTCMGR |
20168 |
Critical |
Unable to start CallManager. |
Check for previous traps. |
| mcpTraps.1125 |
MCP_CM_SMMAIN_CREATEVRMFAIL |
20169 |
Critical |
CreateVRMLib() failed for (<vrm client dll>). |
Check the MCP connections. Verify the MRCP server configurations. |
| mcpTraps.1126 |
MCP_CM_SMMAIN_FAILCREATECMGRMOD |
20170 |
Critical |
Failed to create <module name>. |
In the MCP configuration, check the value of [callmgr]modules and [callmgr]linemanagers. Reinstall the MCP. |
| mcpTraps.1127 |
MCP_CM_SMMAIN_FAILCREATEDEVICE |
20171 |
Critical |
Failed to create <device module name>. |
Reinstall the MCP. |
| mcpTraps.1128 |
MCP_CM_SMMAIN_FAILCREATELNMGR |
20172 |
Critical |
Failed to create <line manager module name>. |
In the MCP configuration, check the value of [callmgr]modules and [callmgr]linemanagers. Reinstall the MCP. |
| mcpTraps.1129 |
MCP_CM_SMMAIN_FAILCREATEMEDTRPT |
20173 |
Critical |
Failed to create <media transport name>. |
In the MCP configuration, check the value of [callmgr]modules and [callmgr]mediatransports. Reinstall the MCP. |
| mcpTraps.1130 |
MCP_CM_SMMAIN_FAILINITAPPMOD |
20174 |
Major |
The Application module <app module name> failed to initialize. |
Check for other traps. Check the configuration parameters related to this Application module. |
| mcpTraps.1131 |
MCP_CM_SMMAIN_FAILINITDEVICE |
20176 |
Critical |
Failed to initialize <device module name>. |
Check for other traps. Check the proper installation/configuration of the system. |
| mcpTraps.1132 |
MCP_CM_SMMAIN_FAILINITLNMGR |
20177 |
Critical |
Failed to initialize <line manager module name>. |
Check for other traps. Check the proper installation/configuration of the system. |
| mcpTraps.1133 |
MCP_CM_SMMAIN_FAILINITMEDTRPT |
20178 |
Critical |
Failed to initialize <media transport name>. |
Check for other traps. Check the proper installation/configuration of the system. |
| mcpTraps.1134 |
MCP_CM_SMMAIN_FAILLOADAPPMODLIB |
20179 |
Major |
The Application module library <app module name> failed to load. |
In the MCP configuration, check the value of [sessmgr]modules. Check the existence of the DLL file. |
| mcpTraps.1135 |
MCP_CM_SMMAIN_LIBNODEFMAKEAPPMOD |
20183 |
Major |
Library <app module name> did not define MakeAppModule(). |
In the MCP configuration, check the value of [sessmgr]modules. Verify the installation of the system. |
| mcpTraps.1136 |
MCP_CM_SMMAIN_LOADTOOMANYAPPMOD |
20184 |
Critical |
Tried to load more than <module count> sessmgr.appmodules. |
Verify the installation of the system. Check the value for the specified configuration parameter. |
| mcpTraps.1137 |
MCP_CM_SMMAIN_LOADTOOMANYCMGRMOD |
20185 |
Critical |
Tried to load more than <module count> callmgr.modules. |
Verify the installation of the system. Check the value for the specified configuration parameter. |
| mcpTraps.1138 |
MCP_CM_SMMAIN_LOADTOOMANYDEVICE |
20186 |
Critical |
Tried to load more than <device module name> callmgr.devices. |
Verify the installation of the system. Check the value for the specified configuration parameter. |
| mcpTraps.1139 |
MCP_CM_SMMAIN_LOADTOOMANYLNMGRS |
20187 |
Critical |
Tried to load more than <module count> callmgr.linemanagers. |
Verify the installation of the system. Check the value for the specified configuration parameter. |
| mcpTraps.1140 |
MCP_CM_SMMAIN_LOADTOOMANYMEDTRPT |
20188 |
Critical |
Tried to load more than <media transport name> callmgr.mediatransports. |
Verify the installation of the system. Check the value for the specified configuration parameter. |
| mcpTraps.1141 |
MCP_CM_SMMAIN_LOADTOOMANYSESSMOD |
20189 |
Critical |
Tried to load more than <module count> sessmgr.modules. |
Verify the installation of the system. Check the value for the specified configuration parameter. |
| mcpTraps.1142 |
MCP_CM_SMMAIN_MAKEVRMFAIL |
20191 |
Critical |
MakeVRMModule() failed for (<vrm client dll>). |
Check the value of the vrm.client.dll configuration variable. Verify the installation of the system. |
| mcpTraps.1143 |
MCP_CM_SMMAIN_NOVLDAPPMODINLIB |
20192 |
Major |
The library <app module name> did not contain any valid Application module. |
Check for other traps. Check the configuration parameters related to this Application module. |
| mcpTraps.1144 |
MCP_CM_SMMAIN_SESSMGRAPPMODCFGERR |
20193 |
Critical |
The configuration parameter <name> was not set properly. |
Check the value for the specified configuration parameter. |
| mcpTraps.1145 |
MCP_CM_SMMAIN_SESSMGRMODCFGERR |
20194 |
Critical |
The configuration parameter <name> was not set properly. |
Check the value for the specified configuration parameter. |
| mcpTraps.1146 |
MCP_CM_SMMAIN_VRMDLLLOADFAIL |
20195 |
Critical |
The VRM DLL(<vrm client dll>) load failed. |
In the MCP configuration, check the value of [vrm] client.dll. Check for the existence of the file. |
| mcpTraps.1147 |
MCP_CM_SMMAIN_VRMSETLOGFAIL |
20196 |
Critical |
SET_VGLOG() could not be found in (<vrm client dll>). |
Verify that the VRM client dll has not been corrupted. |
| mcpTraps.1148 |
MCP_CM_SMMAIN_VXMLAPPMODNOTLOAD |
20197 |
Major |
The VoiceXML Application module was not loaded. |
Check the configuration parameters related to this Application module if the VoiceXML application module is not disabled. |
| mcpTraps.1149 |
MCP_MPC_MEDIAMGR_NOMEDIAINFOOBJECT |
48025 |
Major |
No Media Info Object: <reason>. |
Determine whether there are any unexpected active calls. If there are, check whether the outbound dialing destinations are reachable and functioning. Check the status of RM and SIP Server. Check the SIP client/gateway. |
| mcpTraps.1150 |
MCP_MPC_CONTROL_INITVGMEDIAINFOFAILED |
45003 |
Critical |
Initializing VGMediaInfo failed: <reason>. |
Check the mpc.amr configuration. |
| mcpTraps.1151 |
MCP_MPC_CONTROL_INITDSPCPAFAILED |
45004 |
Critical |
Initializing DSPCPA failed: <reason>. |
This is an unexpected condition. Restart the service if required. |
| mcpTraps.1152 |
MCP_MPC_CONTROL_SDPPARSEFAILED |
45005 |
Major |
Failed to parse SDP due to <reason>. |
Find the SDP message in the SIP trace. Check the SIP client/gateway. |
| mcpTraps.1153 |
MCP_MPC_CONTROL_UNABLETOSETHRRES |
45009 |
Major |
Unable to set the HR Timer Resolution to an acceptable value. Exiting. |
During startup, the MCP was unable determine if the High Resolution Timer was an acceptable resolution. Verify that no other processes are using excessive CPU and restart the MCP. |
| mcpTraps.1154 |
MCP_MPC_CONTROL_EVENTPOOLTHRESHOLDREACHED |
45011 |
Major |
An event pool is above the threshold for used events. Rejecting new connections. |
An event pool is above the threshold for used events. Rejecting new connections. |
| mcpTraps.1155 |
MCP_MPC_CONTROL_EVENTPOOLTHRESHOLDLOWERED |
45012 |
Major |
All event pools are below the threshold for used events. Accepting connections. |
All event pools are below the threshold for used events. Accepting connections. |
| mcpTraps.1156 |
MCP_MPC_MEDIA_RECORDOPENFAILED |
47008 |
Major |
RecordOpen failed, nOpenResult = <id>. |
Check for available disk space. Check the recording file URI. |
| mcpTraps.1157 |
MCP_MPC_MEDIA_PLAYBACKOPENFAILED |
47014 |
Major |
Error opening media: <human readable error>. |
Check the file URI. Check the file Mime-Type. Verify the file name. |
| mcpTraps.1158 |
MCP_CM_SMMAIN_FAILSETFDLIMIT |
20164 |
Minor |
Unable to increase fd limit: <error>. |
Run MCP from an account with super-user access. Note: This alarm is for Linux only. |
| mcpTraps.1168 |
MCP_MTINTERNAL_MINORMAXPORT |
44000 |
Major |
One of <configuration variable> and <configuration variable> was set while the other was not. |
Check the reported configuration variables. Set both or neither of <configuration variable> and <configuration variable>. |
| mcpTraps.1169 |
MCP_MTINTERNAL_MINLARGERTHANMAX |
44001 |
Major |
The <configuration variable> was larger than the <configuration variable>. |
Check the reported configuration variables. |
| mcpTraps.1170 |
MCP_CM_SESSMGR_INVALIDVRMMESSAGE |
30029 |
Minor |
The VRM session <session> had received an invalid VRM message: <message>. |
|
| mcpTraps.1171 |
MCP_CM_SMMAIN_MCPSTARTED |
30030 |
Minor |
The Media Control Platform has been started. |
This trap indicates MCP has started successfully. |
| mcpTraps.1172 |
MCP_CM_SMMAIN_MCPSTOPPED |
30031 |
Minor |
The Media Control Platform has been stopped. |
This trap indicates MCP has been stopped. |
| mcpTraps.1173 |
MCP_MPC_CONTROL_RECORDPOSTFAILURE |
45020 |
Major |
Failures encountered while performing post-processing operations for recording files. Check MCP logs for the failure reason. |
Failures encountered while performing post-processing operations for recording files. Check MCP logs for the failure reason. |
| mcpTraps.1174 |
MCP_MPC_CONTROL_RECORDPOSTBACKLOGTHRESHOLDREACHED |
45021 |
Minor |
Threshold limit reached for post thread. Check config params mpc.recordnumparallelpost and mpc.recordpostinterval. |
Threshold limit reached for post thread. Check config params mpc.recordnumparallelpost and mpc.recordpostinterval. |
| mcpTraps.1175 |
MCP_MPC_CONTROL_RECORDPOSTBACKLOGLOWERED |
45022 |
Minor |
Post thread operating normally. |
Post thread operating normally. |
| mcpTraps.1176 |
MCP_MPC_CONTROL_RECORDPOSTFAILOVERTOOMANYENTRIES |
45023 |
Minor |
Too many post entries recovered during record post failover. Check MCP logs for recoverable errors during post. |
Too many post entries recovered during record post failover. Check MCP logs for recoverable errors during post. |
| mcpTraps.1177 |
MCP_MPC_CONTROL_RECORDFAILURE |
45024 |
Major |
Failures encountered during recording file(s). Check MCP logs for the failure reason. |
Failures encountered during recording file(s). Check MCP logs for the failure reason. |
| mcpTraps.1178 |
MCP_MPC_MEDIA_CM_BADCONFIG |
47023 |
Major |
Error with carrier message configuration. |
Error with carrier message configuration. |
| mcpTraps.1179 |
MCP_MPC_MEDIA_CONFIG_WARN |
47024 |
Major |
Error with MPC Media configuration. |
Error with MPC Media configuration. |
| mcpTraps.1180 |
MCP_MPC_CONTROL_CERTIFICATEISSUE |
45025 |
Minor |
Failures encountered while performing certificate verification for encrypted recording. Check MCP logs for the failure reason. |
Failures encountered while performing certificate verification for encrypted recording. Check MCP logs for the failure reason. |
| mcpTraps.1181 |
MCP_MPC_CONTROL_RECORDPOSTNONRECOVERABLE |
45014 |
Major |
Non-recoverable failure encountered while performing post-processing operations for recording files. Check MCP logs for the failure reason. |
Non-recoverable failure encountered while performing post-processing operations for recording files. Check MCP logs for the failure reason. |
| mcpTraps.2000 |
NGI_APPLOG |
40030 |
Notice |
VoiceXML application <log> |
|
| mcpTraps.2001 |
NGI_LOG_FETCH_RESOURCE_TIMEOUT |
40026 |
Major |
There was a fetch resource timeout. |
Check the network connection or the resource location. |
| mcpTraps.2002 |
NGI_LOG_FETCH_RESOURCE_ERROR |
40027 |
Major |
There was a fetch resource error. |
Check the network connection or the resource location. |
| mcpTraps.2003 |
NGI_LOG_PARSE_ERROR |
40028 |
Major |
A parse error in the VoiceXML page has occurred. |
Correct the syntax in the VoiceXML page. |
| mcpTraps.2004 |
NGI_JS_OUT_OF_MEMORY_ERROR |
40031 |
Critical |
VXML JS Engine run out of memory. |
Check the VXML JS Engine runtime size. |
| mcpTraps.2005 |
NGI_LOG_FETCH_RESOURCE_ERROR_4XX |
40032 |
Major |
There was a fetch resource error of type 4xx. |
Check the network connection or the resource location. |
| mcpTraps.2101 |
GVPI_IVRERRORTRAP |
49102 |
Major |
This is a generic IVR error that is not covered by other IVR traps. |
Check the error message in the trap which indicates why the trap was generated. |
| mcpTraps.2102 |
GVPI_NETWORKTIMEOUT |
49103 |
Major |
A timeout occurred between GVPi module and a web server. |
Check the error message in the trap which indicates if this is caused by the retrieval of an XML page or resource file. Check the availability of the server. |
| mcpTraps.2103 |
GVPI_RESOURCENOTFOUND |
49104 |
Major |
GVPi was unable to find the file that it needs to access. |
Check the error message in the trap, which indicates which file is not accessible. Contact the application developer to correct the error. |
| mcpTraps.2104 |
GVPI_BADXMLPAGE |
49105 |
Major |
This trap indicates a syntax error in the XML page. |
Check the error message in the trap which indicates the incorrect XML page. Contact the application developer to correct the error. |
| mcpTraps.2105 |
GVPI_NETWORKERROR |
49106 |
Major |
The GVPi module experienced a network error. |
Find the specific network error that is causing the trap, which is usually indicated in the trap's error message. |
| mcpTraps.2106 |
GVPI_DIALERROR |
49107 |
Major |
The platform has failed to connect the user to the voice application's outbound number. |
Check the error message in the trap which indicates what caused the dial out error. The failure reason could be carrier error, no circuit available, user busy, or no user responding. Continue to monitor this application. If problem reoccurs, contact Genesys Technical Support. |
| mcpTraps.2107 |
GVPI_CALLDROPPED |
49108 |
Major |
A call failed when being set up, because of an unrecoverable failure in the call routing process. No failover number was provisioned. |
Typically, another trap that shows the call failure reason will precede this trap, but that trap will not indicate that a call had been terminated. |
| mcpTraps.2108 |
GVPI_ABNORMALCALLTERM |
49109 |
Major |
A call failed in the middle of its session because of an unrecoverable failure, and no fail-over number was provisioned. |
Typically, another trap that shows the call failure reason will precede this trap, but that trap will not indicate that a call had been terminated. |
| mcpTraps.2109 |
GVPI_CALLTRANSFERRED |
49110 |
Major |
A call failed because of san unrecoverable failure in the call routing process. The call was transferred to the provisioned failover number. |
Typically, another trap that shows the call failure reason will precede this trap, but that trap will not indicate that a call had been transferred. |
| mcpTraps.2110 |
GVPI_TELEPHONYERROR |
49111 |
Major |
The GVPi module experienced an unrecoverable error when processing call manager requests and replies. |
The error message in the trap indicates the error. |
| mcpTraps.3000 |
MCP_SRM_MRCPADPT_FAIL_LOADING_MRCP_MODULE |
22000 |
Critical |
The MRCP adaptor failed to load the configured MRCP client library. |
Go to your MCP's configuration. Under the VRM section, make sure that the client.dll points to a valid DLL. a. If the client.modules contains MRCPv1, make sure that the client.MRCPv1.dll points a valid DLL. b. If the client.MRCPv2.dll contains MRCPv2, make sure that the client.MRCPv2.dll points to a valid DLL |
| mcpTraps.3001 |
MCP_SRM_MRCPADPT_CONFIGURATION_ERROR |
22001 |
Major |
The MRCP adaptor failed to get configuration data. |
Go to your MCP's configuration. Check that the configuration key in the alarm message is properly configured. |
| mcpTraps.3002 |
MCP_SRM_MRCPADPT_CLOSE_SESSION_FAIL |
22002 |
Minor |
The MRCP adaptor failed to close an MRCP session. |
Check that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3003 |
MCP_SRM_MRCPADPT_STOP_FAIL |
22003 |
Major |
The MRCP adaptor failed to close an MRCP session. |
Check that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3005 |
MCP_SRM_MRCPADPT_LOAD_GRAMMAR_FAIL |
22005 |
Major |
The MRCP adaptor failed to load grammar to an MRCP ASR server. |
Check the grammar that is defined in your application |
| mcpTraps.3006 |
MCP_SRM_MRCPADPT_ASR_SETPARAMS_FAIL |
22006 |
Major |
The MRCP adaptor failed to set parameters to an MRCP ASR server. |
Check the speech related properties that are defined in your application. |
| mcpTraps.3007 |
MCP_SRM_MRCPADPT_ASR_RECOGNIZE_FAIL |
22007 |
Major |
The MRCP adaptor failed to send a RECOGNIZE request. |
Check that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3008 |
MCP_SRM_MRCPADPT_PROMPTDONE_FAIL |
22008 |
Minor |
The MRCP adaptor failed to send a RECOGNITION-START-TIMERS request. |
Check that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3012 |
MCP_SRM_MRCPADPT_TTS_SPEAK_FAIL |
22012 |
Major |
The MRCP adaptor failed to send a TTS SPEAK request. |
Check that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3017 |
MCP_SRM_MRCPADPT_OPEN_SESSION_FAIL |
22017 |
Major |
The MRCP adaptor failed to establish an MRCP session. |
Check that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3018 |
MCP_SRM_MRCPADPT_UNKNOWN_MRCPPROTOCOL |
22018 |
Major |
The MRCP protocol type is not supported. |
Go to your MCP's configuration. Under the VRM section, make sure that the client.modules are configured for your application. For example, if your application uses MRCPv1 speech server, the client.modules should contain MRCPv1. |
| mcpTraps.3019 |
MCP_SRM_MRCPADPT_PROVISION_HANDLER_FAIL |
22019 |
Major |
The MRCP adaptor failed to process the Speech Resource provision update. |
This configuration method is no longer supported. |
| mcpTraps.3020 |
MCP_SRM_MRCPADPT_REDIRECT_FAILED |
22020 |
Major |
The MRCP adaptor failed to process Redirect request. |
Check that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3021 |
MCP_SRM_MRCPADPT_DTMFINPUT_FAILED |
22021 |
Major |
The MRCP adaptor failed to process DTMF input request. |
Go to your MCP's configuration. Under the VRM section, make sure that the SRM Client Module has enabled the DTMF recognizer. |
| mcpTraps.3022 |
MCP_SRM_MRCP_ASR_SENDREQUEST_TIMEOUT |
22022 |
Major |
The ASR request sent to the MRCP server timed-out. |
Check the status of the MRCP server. The MRCP server waiting for the response might be overloaded or might need to be restarted. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3023 |
MCP_SRM_MRCP_ASR_SENDREQUEST_FAILURE |
22023 |
Major |
The ASR request was not sent to the MRCP server because of a connection failure. |
Check the status of the MRCP server. Make sure that the MRCP server is running and that the machine can be pinged. |
| mcpTraps.3024 |
MCP_SRM_MRCP_ASR_RECEIVE_MRCPRESPONSEERR |
22024 |
Major |
The MRCP server returned an error response. |
Check the status of the MRCP server and the error code that was received. Refer to the MRCP v1 (RFC 4463) or MRCPv2 (draft 15) for the MRCP status codes and their corresponding description. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3025 |
MCP_SRM_MRCP_ASR_RECEIVE_MRCPEVENTERR |
22025 |
Major |
The MRCP server returned an error event. |
Check the status of the MRCP server and the completion-cause that was received for the RECOGINTION-COMPLETE MRCP event. Refer to the MRCP v1 (RFC 4463) or MRCPv2 (draft 15) for the completion cause codes and their corresponding descriptions. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3026 |
MCP_SRM_MRCP_ASR_RECEIVE_SERVERRESPONSEERR |
22026 |
Major |
An error occurred with the MRCP ASR server. |
Check the MRCP server; it might not be working properly. For MRCPv1 servers, refer to the RTSP Specification (RFC 2326) for the Status Code and Reason Phrase section. For MRCPv2 servers, refer to the SIP Specification (RFC 3261) for the Status Code and Reason Phrase section. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3027 |
MCP_SRM_MRCP_TTS_SENDREQUEST_TIMEOUT |
22027 |
Major |
The TTS request sent to the MRCP server timed-out. |
Check the status of the MRCP server. The MRCP server waiting for the response might be overloaded or might need to be restarted. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3028 |
MCP_SRM_MRCP_TTS_SENDREQUEST_FAILURE |
22028 |
Major |
The TTS request was not sent to the MRCP server because of a connection failure. |
Check the status of the MRCP server. Make sure that the MRCP server is running and that the machine can be pinged. |
| mcpTraps.3029 |
MCP_SRM_MRCP_TTS_RECEIVE_MRCPRESPONSEERR |
22029 |
Major |
The MRCP server returned an error response. |
Check the status of the MRCP server, and the error code that was received. Refer to the MRCP v1 (RFC 4463) or MRCPv2 (draft 15) for the MRCP status codes, and their corresponding description. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3030 |
MCP_SRM_MRCP_TTS_RECEIVE_MRCPEVENTERR |
22030 |
Major |
The MRCP server returned an error event. |
Check the status of the MRCP server, and the completion-cause that was received for the SPEAK-COMPLETE MRCP event. Refer to the MRCP v1 (RFC 4463) or MRCPv2 (draft 15) for the completion cause codes and their corresponding descriptions. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3031 |
MCP_SRM_MRCP_TTS_RECEIVE_SERVERRESPONSEERR |
22031 |
Major |
An error occurred with the MRCP TTS server. |
Check the MRCP server; it might not be working properly. For MRCPv1 servers, refer to the RTSP Specification (RFC 2326) for the Status Code and Reason Phrase section. For MRCPv2 servers, refer to the SIP Specification (RFC 3261) for the Status Code and Reason Phrase section. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3200 |
MCP_SRM_MRCPV1STACK_NEW_FAILED |
22601 |
Major |
The MRCPv1 stack failed to allocate memory for data. |
Your system is running out of memory. Upgrade your memory or increase your virtual memory. |
| mcpTraps.3201 |
MCP_SRM_MRCPV1STACK_INVALID_CONFIG |
22602 |
Major |
Invalid configuration setup in the MRCPv1 stack. |
Go to your speech resource's configuration. Make sure that the configuration key indicated in the alarm message is properly configured. |
| mcpTraps.3202 |
MCP_SRM_MRCPV1STACK_UNINIT |
22603 |
Major |
Operation while the MRCPv1 stack is uninitialized. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3203 |
MCP_SRM_MRCPV1STACK_CONSTRUCT_BAD_MSG |
22604 |
Major |
The MRCPv1 stack was unable to construct a malformed message. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3204 |
MCP_SRM_MRCPV1STACK_PARSE_BAD_MSG |
22605 |
Major |
The MRCPv1 stack is unable to parse a malformed message. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3205 |
MCP_SRM_MRCPV1STACK_BAD_REQUEST |
22606 |
Major |
The MRCPv1 stack received an invalid request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3400 |
MCP_SRM_MRCPV1_INVALID_ENG_TYPE |
23201 |
Major |
An invalid engine type was specified in the MRCPv1 client. |
Go to your speech resource's configuration. Make sure that the configuration key in the alarm message is properly configured. |
| mcpTraps.3401 |
MCP_SRM_MRCPV1_INVALID_ENG_URI |
23202 |
Major |
An invalid engine URI was specified in the MRCPv1 client. |
Go to your speech resource's configuration. Under the Provision section, make sure that vrm.client.resource.uri is configured correctly. |
| mcpTraps.3402 |
MCP_SRM_MRCPV1_INVALID_ENG_ENTRY |
23203 |
Major |
An invalid engine entry was specified in the configuration file for the MRCPv1 client. |
Go to your MCP's configuration. Make sure that the configuration key in the alarm message is properly configured. |
| mcpTraps.3403 |
MCP_SRM_MRCPV1_INVALID_ENG_IP_PORT |
23204 |
Major |
An invalid IP or port existed for the MRCPv1 engine. |
Go to your speech resource's configuration. Under the Provision section, make sure that the vrm.client.resource.port, vrm.client.resource.address, and vrm.client.resource.uri are configured correctly. |
| mcpTraps.3407 |
MCP_SRM_MRCPV1_INVALID_STACK |
23208 |
Critical |
The MRCPv1 client failed; error creating stack. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3408 |
MCP_SRM_MRCPV1_ENG_TYPE_INIT_ERROR |
23209 |
Critical |
The MRCPv1 client failed on initializing the engine type map. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3409 |
MCP_SRM_MRCPV1_STACK_INIT_ERROR |
23210 |
Critical |
The MRCPv1 client failed on initializing the stack. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3410 |
MCP_SRM_MRCPV1_REQ_MGR_INIT_ERROR |
23211 |
Critical |
The MRCPv1 client failed on initializing the request manager. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3411 |
MCP_SRM_MRCPV1_CONNECTION_MGR_INIT_ERROR |
23212 |
Critical |
The MRCPv1 client failed on initializing the connection manager. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3412 |
MCP_SRM_MRCPV1_STACK_HDLR_INIT_ERROR |
23213 |
Critical |
The MRCPv1 client failed on initializing the stack handler. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3413 |
MCP_SRM_MRCPV1_PROVISION_ERROR |
23214 |
Major |
The MRCPv1 client failed to read the vrmclient provision file. |
This configuration method is no longer supported. |
| mcpTraps.3414 |
MCP_SRM_MRCPV1_FILE_STAT_ERROR |
23215 |
Major |
The MRCPv1 client failed to obtain information about the file. |
Make sure the file mentioned in the alarm message is accessible. |
| mcpTraps.3415 |
MCP_SRM_MRCPV1_GRAM_SIZE_ERROR |
23216 |
Major |
The grammar file size, after stripping the header, is less than 0 in MRCPv1. |
Check the grammar that is defined in your application. |
| mcpTraps.3416 |
MCP_SRM_MRCPV1_GRAM_OPEN_ERROR |
23217 |
Major |
The MRCPv1 client was unable to find the grammar file. |
Check the grammar that is defined in your application. |
| mcpTraps.3417 |
MCP_SRM_MRCPV1_GRAM_OFFSET_ERROR |
23218 |
Major |
The MRCPv1 client was unable to locate information in the grammar file. |
Make sure the file mentioned in the alarm message is accessible. |
| mcpTraps.3418 |
MCP_SRM_MRCPV1_MEM_ALLOC_ERROR2005 |
23219 |
Major |
The MRCPv1 client failed to allocate memory. |
Your system is running out of memory. Upgrade your memory or increase your virtual memory. |
| mcpTraps.3419 |
MCP_SRM_MRCPV1_GRAM_READ_ERROR |
23220 |
Major |
The MRCPv1 client failed to read from the grammar file. |
Make sure the file mentioned in the alarm message is accessible. |
| mcpTraps.3420 |
MCP_SRM_MRCPV1_SERVER_CONNECT_ERROR |
23221 |
Major |
The MRCPv1 client failed to connect to the server. |
Check the speech resource's configuration, and make sure that your speech server is working properly. |
| mcpTraps.3422 |
MCP_SRM_MRCPV1_INVALID_PARAM |
23223 |
Major |
The MRCPv1 client had an invalid configuration parameter. |
Go to your MCP's configuration. Make sure that the configuration key in the alarm message is properly configured. |
| mcpTraps.3423 |
MCP_SRM_MRCPV1_NO_GRAM_BASE |
23224 |
Major |
The MRCPv1 client was unable to read the grammar base path. |
Go to your speech resource's configuration. Under the Provision section, make sure that the vrm.client.HotKeyLocalPath is configured correctly. |
| mcpTraps.3424 |
MCP_SRM_MRCPV1_PING_ERROR |
23225 |
Major |
The MRCPv1 client was unable to ping the servers. |
Make sure that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3435 |
MCP_SRM_MRCPV1_RESPONSE_FAILURE |
23236 |
Major |
The MRCPv1 client received an error code in the response message from the server. |
Make sure that the speech server is working properly. Refer to the RTSP specification (RFC 2326) for the Status Code and Reason Phrase. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3438 |
MCP_SRM_MRCPV1_SOCKET_DISCONNECT |
23239 |
Major |
The MRCPv1 client received an unexpected socket disconnect. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3440 |
MCP_SRM_MRCPV1_SEND_REQUEST_ERROR |
23241 |
Major |
The MRCPv1 client was unable to send a request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3441 |
MCP_SRM_MRCPV1_STACK_SYSTEM_ERROR |
23242 |
Major |
An error occurred while the MRCPv1 client was processing a message. This is most likely a memory allocation error. |
Your system is running out of memory. Upgrade your memory or increase your virtual memory. |
| mcpTraps.3443 |
MCP_SRM_MRCPV1_LOST_CONNECTION |
23244 |
Major |
The MRCPv1 client lost a connection to an ASR/TTS server. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3444 |
MCP_SRM_MRCPV1_RECO_ERROR |
23245 |
Major |
The MRCPv1 client received an error message in the recognize session. |
Make sure that the speech server is working properly. Refer to the RTSP specification (RFC 2326) for the Status Code and Reason Phrase. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3445 |
MCP_SRM_MRCPV1_RECONNECT_SUCCESS |
23246 |
Minor |
The MRCPv1 client successfully reconnected to the server. |
|
| mcpTraps.3447 |
MCP_SRM_MRCPV1_INCORRECT_NLSML_FORMAT |
23248 |
Major |
The NLSML format was not correct in MRCPv1. |
Make sure that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3448 |
MCP_SRM_MRCPV1_ERROR_DECODE_FAILURE |
23249 |
Major |
The MRCPv1 client failed decode the message data. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3450 |
MCP_SRM_MRCPV1_GRAMMAR_READING_ERROR |
23251 |
Major |
An error encountered when the MRCPv1 client was reading a grammar file. |
Go to your speech resource's configuration. Under the Provision section, make sure that the vrm.client.HotKeyLocalPath is configured correctly |
| mcpTraps.3451 |
MCP_SRM_MRCPV1_HOTKEY_GRAMMAR_ERROR |
23252 |
Major |
An error encountered when the MRCPv1 client was handling a hotkey grammar. |
Go to your speech resource's configuration. Under the Provision section, make sure that the vrm.client.HotKeyLocalPath is configured correctly. |
| mcpTraps.3600 |
MCP_SRM_MRCPV2STACK_NEW_FAILED |
23801 |
Major |
The MRCPv2 stack failed to allocate memory for data. |
Your system is running out of memory. Upgrade your memory or increase your virtual memory. |
| mcpTraps.3601 |
MCP_SRM_MRCPV2STACK_INVALID_CONFIG |
23802 |
Major |
The MRCPv2 stack had an invalid configuration setup. |
Go to your speech resource's configuration. Make sure that the configuration key indicated in the alarm message is properly configured. |
| mcpTraps.3602 |
MCP_SRM_MRCPV2STACK_UNINIT |
23803 |
Major |
The MRCPv2 stack operation uninitialized. |
This is an internal error. Try re-installing the software |
| mcpTraps.3603 |
MCP_SRM_MRCPV2STACK_CONSTRUCT_BAD_MSG |
23804 |
Major |
The MRCPv2 stack was unable to construct a malformed message. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3604 |
MCP_SRM_MRCPV2STACK_PARSE_BAD_MSG |
23805 |
Major |
The MRCPv2 stack was unable to parse malformed message. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3605 |
MCP_SRM_MRCPV2STACK_BAD_REQUEST |
23806 |
Major |
The MRCPv2 stack received invalid request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3606 |
MCP_SRM_MRCPV2STACK_SOCKET_ERROR |
23807 |
Major |
The MRCPv2 stack had a socket error. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3607 |
MCP_SRM_MRCPV2STACK_SOCKET_CLOSE |
23808 |
Minor |
The MRCPv2 stack had a socket close error. |
|
| mcpTraps.3609 |
MCP_SRM_MRCPV2STACK_INVALID_SESSIONID |
23810 |
Major |
The MRCPv2 stack received an invalid session ID. |
Make sure that the speech server is working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3610 |
MCP_SRM_MRCPV2STACK_INVALID_METHOD |
23811 |
Major |
The MRCPv2 stack received an invalid MRCP method. |
This is an internal error. Try re-installing the software |
| mcpTraps.3801 |
MCP_SRM_MRCPV2_INVALID_ENG_ENTRY |
24401 |
Major |
The MRCPv2 client had an invalid engine entry in the configuration file. |
Go to your speech resource's configuration. Check that the configuration key in the alarm message is properly configured. |
| mcpTraps.3804 |
MCP_SRM_MRCPV2_RESOURCE_MGR_INIT_ERROR |
24404 |
Critical |
The MRCPv2 client failed to create a Resource Manager. |
This is an internal error. Try re-installing the software |
| mcpTraps.3805 |
MCP_SRM_MRCPV2_FAILED_TO_OPENSESSION |
24405 |
Major |
The MRCPv2 client failed to open a session. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3806 |
MCP_SRM_MRCPV2_CONFIGURATION_ERROR |
24406 |
Major |
The MRCPv2 client failed to obtain configuration information. |
Go to your speech resource's configuration. Check that the configuration key indicated in the alarm message is properly configured. |
| mcpTraps.3807 |
MCP_SRM_MRCPV2_CLOSE_SESSION_FAIL |
24407 |
Minor |
The MRCPv2 client failed to close a session. |
|
| mcpTraps.3808 |
MCP_SRM_MRCPV2_STOP_FAIL |
24408 |
Major |
The MRCPv2 client failed on a STOP request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3810 |
MCP_SRM_MRCPV2_LOAD_GRAMMAR_FAIL |
24410 |
Major |
The MRCPv2 client failed on a DEFINE-GRAMMAR request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3811 |
MCP_SRM_MRCPV2_ASR_SET_PARAMS_FAIL |
24411 |
Major |
The MRCPv2 client failed on a SET-PARAM request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3812 |
MCP_SRM_MRCPV2_ASR_RECOGNIZE_FAIL |
24412 |
Major |
The MRCPv2 client failed on a RECOGNIZE request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3813 |
MCP_SRM_MRCPV2_PROMPTDONE_FAIL |
24413 |
Minor |
The MRCPv2 client failed on a START-INPUT-TIMERS request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3817 |
MCP_SRM_MRCPV2_TTS_SPEAK_FAIL |
24417 |
Major |
The MRCPv2 client failed on a SPEAK request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3822 |
MCP_SRM_MRCPV2_OPEN_SESSION_FAIL |
24422 |
Major |
The MRCPv2 client failed on an OpenSession request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3827 |
MCP_SRM_MRCPV2_SOCKET_DISCONNECT |
24427 |
Major |
The MRCPv2 client received an unexpected socket disconnect. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3828 |
MCP_SRM_MRCPV2_STACK_SYSTEM_ERROR |
24428 |
Major |
An error occurred while the MRCPv2 client was processing a message. This is most likely a memory allocation error. |
Your system is running out of memory. Upgrade your memory or increase your virtual memory. |
| mcpTraps.3833 |
MCP_SRM_MRCPV2_REQ_MGR_INIT_ERROR |
24433 |
Critical |
The MRCPv2 client failed on initializing the request manager. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3834 |
MCP_SRM_MRCPV2_STACK_HDLR_INIT_ERROR |
24434 |
Critical |
The MRCPv2 client failed to initiate the stack handler. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3835 |
MCP_SRM_MRCPV2_NO_GRAMMAR_BASE |
24435 |
Major |
The MRCPv2 client did not have a grammar base folder defined. |
Go to your speech resource's configuration. Under the Provision section, make sure that the vrm.client.HotKeyLocalPath is configured correctly. |
| mcpTraps.3836 |
MCP_SRM_MRCPV2_SEND_REQUEST_ERROR |
24436 |
Major |
The MRCPv2 client failed to send an MRCP request. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3838 |
MCP_SRM_MRCPV2_INITIALIZATION_FAIL |
24438 |
Critical |
The MRCPv2 client failed on initialization. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3839 |
MCP_SRM_MRCPV2_SIPSEND_REQUEST_ERROR |
24439 |
Major |
The MRCPv2 client failed to send a SIP request. |
Make sure that the speech server is working properly. Refer to MRCPv2 specification for the Status Code and Reason Phrase. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3840 |
MCP_SRM_MRCPV2_RECEIVE_RESPONSE_ERROR |
24440 |
Major |
The MRCPv2 client failed to process the response. |
Make sure that the speech server is working properly. Refer to MRCPv2 specification for the Status Code and Reason Phrase. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3841 |
MCP_SRM_MRCPV2_RESPONSE_FAILURE |
24441 |
Major |
The MRCPv2 client received a failed response. |
Make sure that the speech server is working properly. Refer to MRCPv2 specification for the Status Code and Reason Phrase. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3847 |
MCP_SRM_MRCPV2_SERVER_CONNECTION_ERROR |
24447 |
Major |
The MRCPv2 client failed to connect to a server. |
Make sure that the speech server and network are working properly. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3855 |
MCP_SRM_MRCPV2_HOTKEY_GRAMMAR_ERROR |
24455 |
Major |
An error was encountered when the MRCPv2 client was handling a hotkey grammar. |
Go to your speech resource's configuration. Under the Provision section, make sure that the vrm.client.HotKeyLocalPath is configured correctly. |
| mcpTraps.3856 |
MCP_SRM_MRCPV2_FAIL_CREATE_SIP_USER_AGENT |
24456 |
Critical |
The MRCPv2 client failed to create a SIP user agent. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3857 |
MCP_SRM_MRCPV2_FAIL_TO_INITIATE_SIP_SESSION |
24457 |
Major |
The MRCPv2 client failed to initiate a SIP session. |
This is an internal error. Try re-installing the software. |
| mcpTraps.3858 |
MCP_SRM_MRCPV2_SIP_ERROR |
24458 |
Major |
The MRCPv2 client received a SIP error. |
Make sure that the speech server is working properly. Refer to MRCPv2 specification for the Status Code and Reason Phrase. Consult with your third-party MRCP Server vendor. |
| mcpTraps.3859 |
MCP_SRM_MRCPV2_FAIL_TO_OPEN_FILE |
24466 |
Major |
The MRCPv2 client failed to open a file. |
Make sure the specified file exists and there is enough disc space. |
| mcpTraps.5000 |
DTMFLOG_MEM_ALLOC_FAIL |
80000 |
Critical |
The system is running out of memory. Upgrade the system memory or increase system virtual memory. |
The system is running out of memory. Upgrade the system memory or increase system virtual memory. |
| mcpTraps.5002 |
DTMFLOG_GRAM_ERROR |
80002 |
Major |
There is a grammar error. Get more information from the log to confirm the root cause. |
There is a grammar error. Get more information from log to confirm the root cause. |
| mcpTraps.5003 |
DTMFLOG_VGLOG_INVALID_SESSION_ID |
80003 |
Major |
The DTMF recognizer cannot find the correct session for the specified session ID. Report to the vendor with debug level log. |
The DTMF recognizer cannot find the correct session with the specified session ID. Report to the vendor with debug level log. |
| mcpTraps.5004 |
DTMFLOG_FAILED_TO_ACCESS_GRAMMAR |
80004 |
Major |
The DTMF recognizer cannot access the grammar information passed in from the user. Report to the vendor with debug level log. |
The DTMF recognizer cannot access the grammar information passed in from the user. Report to the vendor with debug level log. |
| mcpTraps.5005 |
DTMFLOG_INVALID_STATE |
80005 |
Major |
The DTMF recognition request was not received in the right state. Report to the vendor with debug level log. |
The DTMF recognition request was not received in the right state. Report to the vendor with debug level log. |
| mcpTraps.5006 |
DTMFLOG_FAILED_TO_CREATE_SESSION |
80006 |
Major |
The DTMF recognizer fails to creat a new recognition session. Report to the vendor with debug level log. |
The DTMF recognizer fails to creat a new recognition session. Report to the vendor with debug level log. |
| mcpTraps.5007 |
DTMFLOG_GRAM_NUMBER_MISMATCH |
80007 |
Major |
The grammar alternate rule list number and grammar list number do not match. Report to the vendor with debug level log. |
The grammar alternate rule list number, and grammar list number does not match. Report to the vendor with debug level log. |
| mcpTraps.5008 |
DTMFLOG_GRAMMAR_TYPE_ERROR |
80008 |
Major |
The grammar type is not correct. Check the grammar type to make sure it is one of the followings: ABNF, xml and builtin. |
The grammar type is not correct. Check the grammar type to make sure it is one of the followings: ABNF, xml and builtin |
| mcpTraps.5009 |
DTMFLOG_GRAMMAR_DEFINE_ERROR |
80009 |
Major |
Fail to define grammar. Report to the vendor with debug level log. |
Fail to define grammar. Report to the vendor with debug level log. |
| mcpTraps.5010 |
DTMFLOG_EMPTY_GRAM_ID |
80010 |
Major |
There is no internal grammar ID. Report to the vendor with debug level log. |
There is no internal grammar ID. Report to the vendor with debug level log. |
| mcpTraps.5011 |
DTMFLOG_FAILED_TO_CREATE_JS |
80011 |
Major |
Fail to create JavaScript Engine instance to parse the grammar. Report to the vendor with debug level log. |
Fail to create JavaScript Engine instance to parse the grammar. Report to the vendor with debug level log. |
| mcpTraps.5012 |
DTMFLOG_GRAM_ERROR_EXCEEDED_MAX_TABLE_SIZE |
80012 |
Major |
The maximum grammar table size (120000) is exceeded. Report to the vendor with debug level log and grammars. |
The maximum grammar table size (120000) is exceeded. Report to the vendor with debug level log and grammars. |
| mcpTraps.5013 |
DTMFLOG_FAILED_TO_INIT_XML_CONVERTER |
80013 |
Major |
Fail to initialize XML Converter. Report to the vendor with debug level log. |
Fail to initialize XML Converter. Report to the vendor with debug level log. |
| mcpTraps.5014 |
DTMFLOG_SEMANTIC_INTERPRETATION_ERROR |
80014 |
Major |
Fail to do semantic interpretation. Check log for more details. If cannot find root cause to solve the error, report to the vendor with debug log and grammars. |
Fail to do semantic interpretation. Check log for more details. If cannot find root cause to solve the error, report to the vendor with debug log and grammars. |
| mcpTraps.5015 |
DTMFLOG_FAILED_TO_CREATE_DTMF_RECOG_THREAD |
80015 |
Major |
Fail to create recognition thread. Check log to confirm the possible causes. Restarting MCP may solve the problem. Otherwise, report to the vendor with debug log. |
Fail to create recognition thread. Check log to confirm the possible causes. Restarting MCP may solve the problem. Otherwise, report to the vendor with debug log. |
| mcpTraps.5016 |
DTMFLOG_FAILED_TO_START_DTMF_RECOG |
80016 |
Major |
Fail to start recognition. Report to the vendor with debug level log. |
Fail to start recognition. Report to the vendor with debug level log. |
| mcpTraps.5017 |
DTMFLOG_FAILED_TO_FETCH |
80017 |
Major |
Fail to fetch a grammar. Make sure the grammar exists. |
Fail to fetch a grammar. Make sure the grammar exists. |
| mcpTraps.5018 |
DTMFLOG_FAILED_RECOGNITION |
80018 |
Major |
Fail to complete a recognition session. Report to the vendor with debug level log. |
Fail to complete a recognition session. Report to the vendor with debug level log. |
| mcpTraps.5019 |
DTMFLOG_GRAM_SYNTAX_ERROR |
80019 |
Major |
Grammar syntax error. Correct the grammar syntax error based on the information in the log. |
Grammar syntax error. Correct the grammar syntax error based on the information in the log. |
| mcpTraps.5020 |
DTMFLOG_FAILED_TO_PARSE_GRAM |
80020 |
Major |
Grammar syntax error. Correct the grammar syntax error based on the information in the log. |
Fail to parse a grammar. Correct the grammar syntax based on the information in the log. |
| mcpTraps.5021 |
DTMFLOG_FAILED_TO_GENERATE_NLSML |
80021 |
Major |
Fail to generate recogntion result in the NLSML format. Report to the vendor with debug level log. |
Fail to generate recogntion result in the NLSML format. Report to the vendor with debug level log. |
| mcpTraps.5022 |
DTMFLOG_GRAM_WARNING |
80100 |
Minor |
Recogntion cannot be completed due to grammar issues. Report to the vendor with debug level log and grammars. |
Recogntion cannot be completed due to grammar issues. Report to the vendor with debug level log. |
| mcpTraps.5023 |
DTMFLOG_FAILED_TO_CACHE |
80101 |
Minor |
Fail to add grammar to cache. Report to the vendor with debug level log. |
Fail to add grammar to cache. Report to the vendor with debug level log. |
| mcpTraps.5024 |
DTMFLOG_FAILED_TO_PROCESS_BUFFERED_INPUT |
80102 |
Minor |
Fail to process buffered DTMF Input. Report to the vendor with debug level log. |
Fail to process buffered DTMF Input. Report to the vendor with debug level log. |
| mcpTraps.5025 |
DTMFLOG_FAILED_TO_CLEAR_BUFFERED_INPUT |
80103 |
Minor |
Fail to clear buffered DTMF Input. Report to the vendor with debug level log. |
Fail to clear buffered DTMF input. Report to the vendor with debug level log. |
| mcpTraps.5026 |
DTMFLOG_FAILED_TO_GENERATE_FLAT_PARSE_LIST |
80104 |
Minor |
Fail to generate flat parse list. Report to the vendor with debug level log. |
Fail to generate flat parse list. Report to the vendor with debug level log. |
| mcpTraps.5027 |
DTMFLOG_DUPLICATED_RULES |
80106 |
Minor |
There are duplicated rules. Check the grammar to remove the duplicated rules. |
There are duplicated rules. Check the grammar to remove the duplicated rules. |
| mcpTraps.5028 |
DTMFLOG_FAILED_TO_ACCESS_RULE_DURING_SI |
80107 |
Minor |
Fail to access rule when doing synatic interpretation. Report to the vendor with debug level log. |
Fail to access rule when doing synatic interpretation. Report to the vendor with debug level log. |
| mcpTraps.5029 |
DTMFLOG_FAILED_TO_PROCESS_DTMF_INPUT |
80108 |
Minor |
Fail to process DTMF input. Report to the vendor with debug level log. |
Fail to process DTMF input. Report to the vendor with debug level log. |
| mcpTraps.5030 |
DTMFLOG_FAILED_TO_STOP_DTMF_RECOG |
80109 |
Minor |
Fail to Stop the DTMF recognizer. Report to the vendor with debug level log. |
Fail to stop the DTMF recognizer. Report to the vendor with debug level log. |
| mcpTraps.5031 |
DTMFLOG_FAILED_TO_DELETE_DTMF_SESSION |
80110 |
Minor |
Fail to delete a recogntion session. Report to the vendor with debug level log. |
Fail to delete DTMF session. Report to the vendor with debug level log. |
| mcpTraps.5032 |
DTMFLOG_FAILED_TO_GET_BUFFERED_DTMF |
80111 |
Minor |
Fail to get buffered DTMF. Report to the vendor with debug level log. |
Fail to get bufferred DTMF. Report to the vendor with debug level log. |
| mcpTraps.5033 |
DTMFLOG_FAILED_TO_DELETE_NOINPUT_TIMER |
80112 |
Minor |
Fail to delete the noinput timer. Report to the vendor with debug level log. |
Fail to delete the noinput timer. Report to the vendor with debug level log. |
| mcpTraps.5034 |
DTMFLOG_FAILED_TO_PROCESS_EVENT |
80113 |
Minor |
Fail to process recongition events. Report to the vendor with debug level log. |
Fail to process recongition events. Report to the vendor with debug level log. |
| mcpTraps.5035 |
DTMFLOG_FAILED_TO_PROCESS_NOINPUT |
80114 |
Minor |
Fail to porcess the noinput event. Report to the vendor with debug level log. |
Fail to porcess the noinput event. Report to the vendor with debug level log. |
| mcpTraps.5036 |
DTMFLOG_FAILED_TO_START_NOINPUT_TIMER |
80115 |
Minor |
Fail to start the noinput timer. Report to the vendor with debug level log. |
Fail to start the noinput timer. Report to the vendor with debug level log. |
| mcpTraps.5037 |
DTMFLOG_FAILED_TO_DELETE_NEXT_TIMER_EVENT |
80116 |
Minor |
Fail to delete next timer event. Report to the vendor with info level log. |
Fail to delete next timer event. Report to the vendor with info level log. |
| Trap OID | Trap Name | MF Log ID | Severity | Description | User Action |
| rmTraps.1000 |
GVPLOG_RM_UNRECOVERABLEERR |
20006 |
Critical |
Unrecoverable Error |
Restart the RM. |
| rmTraps.1001 |
GVPLOG_RM_CONFIGERR |
20007 |
Major |
RM proxy initalization failed |
Check configuration. |
| rmTraps.1003 |
GVPLOG_RM_SOCKETERR |
20009 |
Major |
Socket Error |
Check configuration for port conflict. |
| rmTraps.1004 |
GVPLOG_RM_RESOURCEALLOCERR |
20010 |
Major |
Resource allocation failure |
This is an unexpected condition. Restart the service if required and contact Genesys Technical Support. |
| rmTraps.1005 |
GVPLOG_RM_CDRINITERR |
20011 |
Major |
This is a CDR initialization failure |
This is an unexpected condition. Restart the service if required and contact Genesys Technical Support. |
| rmTraps.1006 |
GVPLOG_RM_CDRUNINITERR |
20012 |
Major |
This is a CDR uninitialization failure |
This is an unexpected condition. Restart the service if required and contact Genesys Technical Support. |
| rmTraps.1007 |
GVPLOG_RM_CDRRECORDCREATEERR |
20013 |
Major |
This is a CDR record creation failure |
This is an unexpected condition. Restart the service if required and contact Genesys Technical Support. |
| rmTraps.1008 |
GVPLOG_RM_CDRRECORDDELETEERR |
20014 |
Major |
This is a CDR record deletion failure |
This is an unexpected condition. Restart the service if required and contact Genesys Technical Support. |
| rmTraps.1009 |
GVPLOG_RM_DIALINGRANGEEXCEED |
20015 |
Major |
The dialing rule range was exceeded |
Check Configuration values in the gvp.policy.dialing-rules section to see if they are properly configured. |
| rmTraps.1010 |
GVPLOG_RM_DIALINGTYPEINVALID |
20016 |
Major |
The dialing rule type that was specified is invalid. |
Check Configuration values in the gvp.policy.dialing-rules section to see if they are properly configured. |
| rmTraps.1011 |
GVPLOG_RM_DIALINGEXPRINVALID |
20017 |
Major |
The dialing expression was invalid. |
Check Configuration values in the gvp.policy.dialing-rules section to see if they are properly configured. |
| rmTraps.1012 |
GVPLOG_RM_DNISNOTEXIST |
20018 |
Major |
The DNIS that was specified in the call was not configured; therefore, the call played the default IVR Profile |
Check Configuration to see whether DNIS is configured. |
| rmTraps.1013 |
GVPLOG_RM_DEFAULTTENTANTNOTFOUND |
20019 |
Major |
The default tenant was not found |
This is an unexpected condition; check to see if the ""Environment"" tenant is defined in the Management Framework. |
| rmTraps.1014 |
GVPLOG_RM_REQUESTURITRANSLATIONFAIL |
20020 |
Major |
Request URI translation failure |
Not applicable. |
| rmTraps.1015 |
GVPLOG_RM_CALLCREATEFAIL |
20021 |
Major |
Call creation failed |
Check if the Policy was violated. |
| rmTraps.1016 |
GVPLOG_RM_APPPROFILENOTFOUND |
20022 |
Major |
An Application / IVR Profile was not found |
Check if application/IVR Profile exists. |
| rmTraps.1017 |
GVPLOG_RM_TENANTNOTFOUND |
20023 |
Major |
The tenant ID that was requested cannot be found. |
Check whether an IVRProfile with name in tenant-id request URI parameter exists. |
| rmTraps.1018 |
GVPLOG_RM_DEFAULTIVRPROFILENOTFOUND |
20024 |
Major |
The default IVR Profile was not found. |
Check whether the default application configured in the Environment tenant exists. |
| rmTraps.1019 |
GVPLOG_RM_DEFAULTSERVICETYPENOTFOUND |
20025 |
Major |
The default service type was not found. |
Check whether the mapped application contains a default service type. |
| rmTraps.1020 |
GVPLOG_RM_MANDATORYURIPARAMNOTFOUND |
20026 |
Major |
The mandatory URI parameter was not found. |
Check whether the request URI contains the mandatory URI parameter for the service type specified in the Request URI. |
| rmTraps.1021 |
GVPLOG_RM_INVALIDURIPARAM |
20027 |
Major |
An invalid URI parameter was encountered. |
Not applicable. |
| rmTraps.1022 |
GVPLOG_RM_SERVICEPREREQNOTFOUND |
20028 |
Major |
The service prerequisite was not found. |
Not applicable. |
| rmTraps.1023 |
GVPLOG_RM_NOMATCHINGSERVICETYPE |
20029 |
Major |
A matching logical group for the specified service type was not defined |
Check whether the resource is configured, or whether usage has been exceeded. |
| rmTraps.1024 |
GVPLOG_RM_NOMATCHINGGWPREFERENCE |
20030 |
Major |
The RM was unable to allocate a resource based on the gateway preference. |
Check usage on the gateway resource has been exceeded. |
| rmTraps.1025 |
GVPLOG_RM_CCILIBINVALIDPARAM |
20031 |
Major |
The CCILib agent encountered an invalid parameter. |
This is an unexpected condition; check the name of the Resource Manager, and try restarting again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1026 |
GVPLOG_RM_CCILIBCONFIGOBJERR |
20032 |
Major |
The CCILib failed to get the configuration object. |
This is an unexpected condition; try restarting the Resource Manager. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1027 |
GVPLOG_RM_CCILIBRMOBJERR |
20033 |
Major |
The CCILib failed to get the RM object. |
This is an unexpected condition; try restarting the Resource Manager again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1028 |
GVPLOG_RM_CCILIBRESOBJNOTFOUND |
20034 |
Major |
The CCILib failed to locate the resource object. |
This is an unexpected condition; try restarting again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1029 |
GVPLOG_RM_CCILIBLOGICALRESCREATEFAIL |
20035 |
Major |
The CCILib failed to create a logical resource. |
This is an unexpected condition; try restarting the Resource Manager again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1030 |
GVPLOG_RM_CCILIBPHYSICALRESCREATEFAIL |
20036 |
Major |
The CCILib failed to create a physical resource. |
This is an unexpected condition; try restarting Resource Manager again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1031 |
GVPLOG_RM_CCILIBTENANTNOTFOUND |
20037 |
Major |
The CCILib was unable to find information for the tenant. |
This is an unexpected condition; check whether the ""Environment"" tenant is defined in the Management Framework. |
| rmTraps.1032 |
GVPLOG_RM_CCILIBTENANTCREATEFAIL |
20038 |
Major |
The CCILib was unable to create a tenant. |
This is an unexpected condition; check whether the ""Environment"" tenant is defined in the Management Framework. |
| rmTraps.1033 |
GVPLOG_RM_CCILIBAPPIDNOTFOUND |
20039 |
Major |
The CCILib was unable to find the application ID. |
This is an unexpected condition; try restarting Resource Manager again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1034 |
GVPLOG_RM_CCILIBLINKEDRESNOTFOUND |
20040 |
Major |
The CCILib linked resource was not found. |
No Resources are configured for the RM. Check the resource provisioning. |
| rmTraps.1035 |
GVPLOG_RM_CCILIBPARENTNOTFOUND |
20041 |
Major |
The CCILib was unable to find parent information for the resource object. |
Check the parent object to which the resource belongs. Make sure that it is linked to the environment tenant. |
| rmTraps.1036 |
GVPLOG_RM_CCILIBLOGICALRESGROUPNOTFOUND |
20042 |
Major |
The CCILib was unable to find the logical resource group |
The logical resource group name that was specified in the connection does not exist. Make sure the logical resource group name as specified in the logical-resource-section parameter in the connection, exists in the RM. |
| rmTraps.1037 |
GVPLOG_RM_CCILIBTENANTCONVERTERROR |
20043 |
Major |
The CCILib was unable to convert the tenant object. |
This is an unexpected condition; try restarting Resource Manager again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1038 |
GVPLOG_RM_CCILIBCAPADDERROR |
20044 |
Major |
The CCILib was unable to add capability for the specified service type |
The specified capability-requirement is not supported for the specified service type. |
| rmTraps.1039 |
GVPLOG_RM_CCILIBAPPCONVERTERROR |
20045 |
Major |
The CCILib was unable to convert an application object. |
This is an unexpected condition; try restarting Resource Manager again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1041 |
GVPLOG_RM_RESSESSIONCREATEFAIL |
20047 |
Major |
Creating a resource session failed. |
This is an unexpected condition; try restarting Resource Manager again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1042 |
GVPLOG_RM_CCILIBAPPCREATEFAIL |
20048 |
Major |
The CCILib was unable to create an application. |
This is an unexpected condition; try restarting Resource Manager again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1043 |
GVPLOG_RM_CCILIBUPDATEINVALIDCFGOBJ |
20049 |
Major |
The CCILib was updated; however, the configuration object was invalid. |
Check that the values updated dynamically are valid. |
| rmTraps.1044 |
GVPLOG_RM_CCILIBUPDATETENANTNOTFOUND |
20050 |
Major |
The CCILib was updated; however, the tenant could not be found. |
This is an unexpected condition; try restarting Resource Manager again. If the problem persists, contact Genesys Technical Support. |
| rmTraps.1045 |
GVPLOG_RM_CCILIBUPDATETENANTPOPULATEFAIL |
20051 |
Major |
The CCILib was updated; however, the tenant population failed. |
Check that the values updated dynamically are valid. |
| rmTraps.1046 |
GVPLOG_RM_CCILIBUPDATEAPPNOTFOUND |
20052 |
Major |
The CCILib was updated; however, the application could not be found. |
This is an unexpected condition. Try adding the IVRProfile update again; if it still fails, contact Genesys Technical Support. |
| rmTraps.1047 |
GVPLOG_RM_CCILIBUPDATEAPPPOPULATEFAIL |
20053 |
Major |
The CCILib was updated; however, populating the application failed. |
Check that the values updated dynamically are valid. |
| rmTraps.1048 |
GVPLOG_RM_CCILIBUPDATELOGICALRESNOTFOUND |
20054 |
Major |
The CCILib was updated; however, the logical resource group could not be found. |
Not applicable. |
| rmTraps.1049 |
GVPLOG_RM_CCILIBUPDATELOGICALRESADDERR |
20055 |
Major |
The CCILib was updated; however, adding the logical resource group failed. |
This is an unexpected condition. Try reconnecting the Physical Resource; if it still fails, contact Genesys Technical Support. |
| rmTraps.1050 |
GVPLOG_RM_CCILIBUPDATERESOBJNOTFOUND |
20056 |
Major |
The CCILib was updated; however, the resource object was not found. |
This is an unexpected condition. Try reconnecting the Physical Resource; if it still fails, contact Genesys Technical Support. |
| rmTraps.1051 |
GVPLOG_RM_CCILIBUPDATEPHYRESCREATEFAIL |
20057 |
Major |
The CCILib was updated; however, creating the physical resource failed. |
This is an unexpected condition. Try reconnecting the Physical Resource; if it still fails, contact Genesys Technical Support. |
| rmTraps.1052 |
GVPLOG_RM_CCILIBUPDATEINVALIDOBJ |
20058 |
Major |
The CCILib was updated; however, an invalid delta object was encountered. |
This is an unexpected condition. Retry dynamic update; if it still fails, contact Genesys Technical Support. |
| rmTraps.1053 |
GVPLOG_RM_CCILIBUPDATEINVALIDOBJTYPE |
20059 |
Major |
The CCILib was updated; however, an invalid object type was encountered. |
This is an unexpected condition. Retry dynamic update; if it still fails, contact Genesys Technical Support. |
| rmTraps.1054 |
GVPLOG_RM_CCILIBUPDATETENANTADDFAIL |
20060 |
Major |
The CCILib update tenant addition failed. |
Check that the values updated dynamically are valid. |
| rmTraps.1055 |
GVPLOG_RM_CCILIBUPDATEAPPADDFAIL |
20061 |
Major |
The CCILib update application addition failed. |
Check that the values updated dynamically are valid. |
| rmTraps.1056 |
GVPLOG_RM_CCILIBUPDATETENANTREMOVEFAIL |
20062 |
Major |
The CCILib update tenant deletion failed. |
Not applicable |
| rmTraps.1057 |
GVPLOG_RM_CCILIBUPDATEAPPREMOVEFAIL |
20063 |
Major |
The CCILib update application deletion failed. |
Check whether the IVRProfile has been removed. If it has not been removed yet, try removing it again; if it is still unsuccessful, contact Genesys Technical Support. |
| rmTraps.1058 |
GVPLOG_RM_CCILIBUPDATETENANTUPDATEFAIL |
20064 |
Major |
The CCILib update tenant update failed. |
Check that the values updated dynamically are valid. |
| rmTraps.1059 |
GVPLOG_RM_CCILIBUPDATEAPPLICATIONUPDATEFAIL |
20065 |
Major |
The CCILib update application update failed. |
Check that the values updated dynamically are valid. |
| rmTraps.1060 |
GVPLOG_RM_REGISTERERROR |
20066 |
Major |
Received error related to SIP REGISTER. |
Check Configuration to make sure that the SIP endpoint sending REGISTER to the RM is also provisioned to the RM. |
| rmTraps.1061 |
GVPLOG_RM_INVALIDMSG |
20067 |
Minor |
Message exchanged between the active and standby RM is invalid |
RM received an invalid SIP message. |
| rmTraps.1062 |
GVPLOG_RM_INVALIDCONFIG |
20068 |
Minor |
Configuration syntax is incorrect. |
Fix the invalid configuration parameter. |
| rmTraps.1064 |
GVPLOG_RM_NETWORKPROBLEM |
20070 |
Minor |
This was a LAN problem. |
Verify that the network is configured properly. |
| rmTraps.1065 |
GVPLOG_RM_REQUESTURIPARSEFAIL |
20071 |
Minor |
Request URI parse failure. |
RM received a SIP message with an invalid request URI. |
| rmTraps.1066 |
GVPLOG_RM_OPTIONUSERINFOEXIST |
20072 |
Minor |
User Info should not exist in option message. |
RM received a SIP message with an invalid user info field |
| rmTraps.1067 |
GVPLOG_RM_TOHEADERPARSEFAIL |
20073 |
Minor |
Failed to parse TO header |
RM received a SIP message with an invalid To header. |
| rmTraps.1068 |
GVPLOG_RM_RMSERVICEAGENTBADMSGFORMAT |
20074 |
Minor |
The RM service agent received a bad message. |
RM received an invalid internode message. Check that the RM active-backup pair are running with the same version. |
| rmTraps.1069 |
GVPLOG_RM_RMSUSPEND |
20075 |
Minor |
The RM is in the process of a suspension. |
RM operating in suspended mode. |
| rmTraps.1070 |
GVPLOG_RM_SIPSERVICESAMEPRECEDENCE |
20076 |
Minor |
A SIP service with the same precedence value was found. |
Not Applicable. |
| rmTraps.1071 |
GVPLOG_RM_INVALIDCALLTENANTID |
20077 |
Minor |
The gvp-tenant-id did not belong to the current call tenant. |
Not Applicable. |
| rmTraps.1072 |
GVPLOG_RM_FAILEDTOFINDLINKEDTENANT |
20078 |
Minor |
Failed to get linked tenant |
Service tenant for the MF object cannot be found. Fix the configuration parameter. |
| rmTraps.1073 |
GVPLOG_RM_FAILEDTOFINDLINKEDRESOURCE |
20079 |
Minor |
Failed to get linked resource |
RM does not have any linked resource configured. Fix the configuration parameter. |
| rmTraps.1074 |
GVPLOG_RM_LOGICALRESINFONOTFOUND |
20080 |
Minor |
The logical resource group information was not found. |
Not Applicable. |
| rmTraps.1075 |
GVPLOG_RM_LOGICALRESPOPULATEFAIL |
20081 |
Minor |
The logical resource population failed. |
Fix the invalid logical resource group configuration parameter. |
| rmTraps.1076 |
GVPLOG_RM_LOGICALRESSECTIONNOTFOUND |
20082 |
Minor |
The logical resource section was not found. |
Fix the invalid logical resource group configuration parameter. |
| rmTraps.1077 |
GVPLOG_RM_PHYSRESPOPULATEFAIL |
20083 |
Minor |
The logical resource population failed. |
Fix the invalid physical resource configuration parameter. |
| rmTraps.1078 |
GVPLOG_RM_TENANTPOPULATEINCOMPLETE |
20084 |
Minor |
The tenant population was incomplete. |
Fix the invalid tenant configuration parameter. |
| rmTraps.1079 |
GVPLOG_RM_APPINFONOTFOUND |
20085 |
Minor |
The IVR application information was not found. |
Fix the invalid IVRProfile configuration parameter. |
| rmTraps.1080 |
GVPLOG_RM_APPPOPULATEINCOMPLETE |
20086 |
Minor |
The application information population was incomplete. |
Fix the invalid IVRProfile configuration parameter. |
| rmTraps.1081 |
GVPLOG_RM_DNISEXTRACTFAIL |
20087 |
Minor |
The DNIS extraction failed. |
Check for invalid DNIS range configuration. |
| rmTraps.1082 |
GVPLOG_RM_SETTINGLOGICALRESPROPERTIES |
20088 |
Minor |
The RM has set logical resource properties. |
This trap indicates that the logical resource group information is updated. |
| rmTraps.1083 |
GVPLOG_RM_AORNOTFOUND |
20089 |
Minor |
The address of record was not found for the resource. |
Fix the invalid physical resource configuration parameter. |
| rmTraps.1084 |
GVPLOG_RM_CAPACITYNOTFOUND |
20090 |
Minor |
Capacity was not found for the resource. |
Fix the invalid physical resource configuration parameter. |
| rmTraps.1085 |
GVPLOG_RM_CAPACITYNONUNSIGNED |
20091 |
Minor |
Capacity is not an unsigned integer. |
Fix the invalid physical resource configuration parameter. |
| rmTraps.1086 |
GVPLOG_RM_SETTINGPHYRESPROPERTIES |
20092 |
Minor |
Setting Phyiscal Resource Properties |
This trap indicates that the physical resource information is updated. |
| rmTraps.1087 |
GVPLOG_RM_UPDATELOGICALRESGROUPNOTFOUND |
20093 |
Minor |
CCILib update - logical resource group was not found. |
Fix the invalid logical resource configuration parameter. |
| rmTraps.1088 |
GVPLOG_RM_UPDATEPOPULATEPHYRESFAIL |
20094 |
Minor |
CCILib update failed to populate physical resource. |
Fix the invalid physical resource configuration parameter. |
| rmTraps.1089 |
GVPLOG_RM_UPDATEFAILGETPHYRES |
20095 |
Minor |
CCILib update failed to get physical resource. |
Fix the invalid physical resource configuration parameter. |
| rmTraps.1090 |
GVPLOG_RM_UPDATEPOPULATELOGICALRESFAIL |
20096 |
Minor |
CCILib update failed to populate logical resource. |
Fix the invalid logical resource group configuration parameter. |
| rmTraps.1091 |
GVPLOG_RM_UPDATELOGICALRESNOTFOUND |
20097 |
Minor |
CCILib update - logical resource section was not found. |
Fix the invalid logical resource group configuration parameter. |
| rmTraps.1092 |
GVPLOG_RM_UPDATEPHYRESREMOVED |
20098 |
Minor |
CCILib update - physical resource was removed. |
This trap indicates that a physical resource has been removed. |
| rmTraps.1093 |
GVPLOG_RM_UPDATETENANTADDED |
20099 |
Minor |
CCILib update - new tenant was added. |
This trap indicates that a tenant has been updated. |
| rmTraps.1094 |
GVPLOG_RM_UPDATEAPPADDED |
20100 |
Minor |
CCILib update: CCILib update - new application was added. |
This trap indicates that a new IVRProfile application has been added. |
| rmTraps.1095 |
GVPLOG_RM_UPDATELINKEDTENANTREMOVED |
20101 |
Minor |
CCILib update - linked tenant was removed. |
This trap indicates that a tenant has been removed. |
| rmTraps.1096 |
GVPLOG_RM_UPDATEAPPREMOVED |
20102 |
Minor |
CCILib update - application was removed. |
This trap indicates that an IVRProfile application has been removed. |
| rmTraps.1097 |
GVPLOG_RM_UDPATELINKEDTENANTUPDATED |
20103 |
Minor |
CCILib update - linked tenant was updated. |
This trap indicates that a tenant has been updated. |
| rmTraps.1098 |
GVPLOG_RM_UDPATEAPPDATAUPDATED |
20104 |
Minor |
CCILib update - application data was updated. |
This trap indicates that an IVRProfile has been updated. |
| rmTraps.1099 |
GVPLOG_RM_UPDATEIGNORED |
20105 |
Minor |
CCILib update - ignored update for the application. |
Fix the invalid policy configuration parameter. |
| rmTraps.1100 |
GVPLOG_RM_WARNING_BAD_REGEX |
20106 |
Minor |
Bad regular expression |
Not applicable. |
| rmTraps.1105 |
GVPLOG_RM_STARTUP |
20142 |
Minor |
The RM was started. |
This trap indicates RM has started successfully. |
| rmTraps.1106 |
GVPLOG_RM_SHUTDOWN |
20143 |
Minor |
The RM was shut down. |
This indicates RM is shutting down. |
| rmTraps.1116 |
GVPLOG_RM_POLICYVIOLATIONERROR |
20122 |
Minor |
The usage limit was exceeded for the call. |
This trap indicates RM rejected a call because of policy violation. |
| rmTraps.1117 |
GVPLOG_RM_BURSTAPPBEGIN |
20128 |
Minor |
Burst above usage limit has been started for IVR Profile |
This trap indicates that RM application usage has exceeded the burst limit. |
| rmTraps.1118 |
GVPLOG_RM_BURSTAPPEND |
20129 |
Minor |
Burst above usage limt has been ended for IVR Profile |
This trap indicates that RM application usage has dropped below the burst limit. |
| rmTraps.1119 |
GVPLOG_RM_BURSTTENANTBEGIN |
20130 |
Minor |
Burst above usage limit has been started for Tenant |
This trap indicates that RM tenant usage has exceeded the burst limit. |
| rmTraps.1120 |
GVPLOG_RM_BURSTTENANTEND |
20131 |
Minor |
Burst above usage limt has been ended for Tenant |
This trap indicates that RM tenant usage has dropped below the burst limit. |
| rmTraps.1121 |
GVPLOG_RM_ACTIVEMODE |
20132 |
Notice |
RM Node is going Active |
This trap indicates the specific member of the RM cluster is going active. |
| rmTraps.1122 |
GVPLOG_RM_STANDBYMODE |
20133 |
Notice |
RM Node is going Standby |
This trap indicates the specific member of the RM cluster is going standby. |
| rmTraps.1123 |
GVPLOG_RM_NETWORKRECOVERY |
20134 |
Minor |
LAN recovered |
This trap indicates that the network has been recovered from a previous error. |
| rmTraps.1124 |
GVPLOG_RM_REDUNDANCYUNDEFINED |
20136 |
Minor |
Specify a value for redundancy-type on physical resource managed by RM. |
Specify a value for redundancy-type on physical resource managed by RM. |
| rmTraps.1125 |
GVPLOG_RM_SUBSCRIPTION_ERROR |
20135 |
Minor |
SUBSCRIBE request with an event name not known to RM was received. Specify the correct event name in the SUBSCRIBE request. |
SUBSCRIBE request with an event name not known to RM is received. Specify the correct event name in the SUBSCRIBE request. |
| rmTraps.1126 |
GVPLOG_RM_UNSUBSCRIBE |
20137 |
Minor |
RM unsubscribed an event subscription |
This trap is generated when a subscription is terminated. |
| rmTraps.1127 |
GVPLOG_RM_POLICYENFORCEMENTVIOLATIONERROR |
20138 |
Major |
Invalid configuration caused a policy enforcement error |
Fix the invalid policy configuration parameter. |
| rmTraps.1128 |
GVPLOG_RM_SINGLETENANT |
20139 |
Minor |
RM started in single tenant mode |
This trap indicates that RM is operating in a single tenant environment. |
| rmTraps.1129 |
GVPLOG_RM_HAMODE |
20140 |
Minor |
RM started in HA mode |
This trap indicates the high-availability mode. |
| rmTraps.1130 |
GVPLOG_RM_CONFIGINFO |
20141 |
Minor |
RM configuration information |
This trap indicates the configuration information for RM. |
| rmTraps.1131 |
GVPLOG_RM_RESOURCE_STATUS_CHANGED |
20148 |
Major |
Resource Status changed |
This trap indicates that one of the RM monitored resource had it status changed. |
| rmTraps.1132 |
GVPLOG_RM_PORTEXCEEDED |
20149 |
Major |
Resource port exceeded |
This trap indicates that resource usage has been exceeded. |